Bowers and Wilkins CCM663SR

£450.00
The Bowers and Wilkins CCM663SR stereo ceiling speaker marries a woven Aramid Fibre coned twin voice-coil 150mm (6 inch) bass/midrange driver with an offset array of two 25mm (1in) soft dome tweeters. Thanks to its highly accurate and natural sound, Aramid Fibre features on Bowers most advanced high performance hi-fi speakers and it brings the same qualities to the CCM663SR.

The twin voice coils and tweeters combine the stereo signal to enable the use of just one ceiling speaker in an installation zone without the loss of one audio channel. The CCM663SR also includes a two-position stereo/surround switch to instantly make the speaker suitable for use as a surround channel.

Use the CCM663SR for...

Multi room audio
Use the Bowers and Wilkins CCM663SR stereo ceiling speaker with multi room audio systems such as Bluesound and Control4.

Bathrooms and en-suites

The CCM663SR is perfect for use in bathrooms and en-suites.

Suitability
Best suited to small and medium size rooms.

CCM663SR specification

Sensitivity - 89dB 1W/1m
Power recommendations - 25 - 80 Watts
Impedance - 8 Ohms
Frequency range - 48Hz - 30kHz
Diameter x depth - 240mm x 133mm
Cut-out - 202mm

Drivers
2-Way dual channel
6 inch blue Aramid Fibre cone bass/midrange
2 x 1 inch soft dome tweeters

CCM663SR features

Low distortion, high resolution drive unit technologies

Adjustable EQ and tweeter directivity to optimise sound

Stereo sound from a single speaker