Control4 SDAPD240-N dual load adaptive phase dimmer

The Control4 SDAPD240-N dual load adaptive phase dimmer combines elegant dimming with a configurable keypad for the ultimate in lighting control of up to two lighting loads. Unlock the power of one-touch automation by simply replacing an existing light switch with a wireless dimmer.
Provides independent dimming control of up to two lighting circuits.

Turns a standard light switch or dimmer into a fully customizable keypad and dimmer.

Wireless communication and standard wiring provide easy installation in new construction and retrofit environments.

Compatible with a variety of load types including LEDs, incandescent, halogen, electronic low-voltage (solid state) transformers, magnetic (iron core) low-voltage transformers, fluorescents, compact fluorescents.

Supports both forward-phase (leading edge) and reverse-phase (trailing edge) dimming.

Automatically detects load type and determines the appropriate dimming type.

Protection circuitry prevents device damage in case of short circuit or excessive load.

Continuously measures energy being used by the attached load.

Configure with two to seven buttons using five different button sizes for a total of 38 possible configurations.

Control4 dual load adaptive phase dimmer (Zigbee) data sheet
Easy reconfiguration means there's no need to worry about how many buttons will be needed on a specific dimmer before (or even after) installation.

Elegant, sophisticated design makes a beautiful addition to any home or business.

Custom engraving available to clearly identify each button.

Backlit button engraving with programmable colour control for easy readability regardless of time of day or light level.

Programmable RGB LEDs provide status feedback for lighting and other devices in the system.

Ambient light sensor can automatically adjust backlight and status LED brightness depending on the light level in the room.

Ships as "neutral" device with no buttons included. Keypad-style button kit and rocker-style button kits sold separately in a variety of colours.

Control4 screw-less faceplates, sold separately, provide a sleek profile.

Installs in standard square UK wall box.
Control communications
ZigBee, IEEE 802.15.4, 2.4 GHz, 15-channel spread spectrum radio

Wires per connector

One 0.5 mm2 - 2.5 mm2 (20AWG - 10AWG) or Two 0.5 mm2 - 1.5 mm2 (20AWG - 16AWG)

81mm x 81mm x 30 mm

Power requirements

230VAC +/-10%, 50/60 Hz
This device can function with or without a neutral AC connection depending on load type. Wiring with a neutral is always the preferred wiring method (if possible). When wired without a neutral load 1 will be forced into a switch-only mode. It will not be possible to dim load 1. The minimum wattage requirements increase. See "minimum load".

Supported load types

Incandescent, halogen, electronic (solid state) low-voltage (ELV) transformer, magnetic (iron core, inductive) low-voltage (MLV) transformer1, phase-dimmable fluorescent, compact fluorescent and LED.

Important: Do not use with non-dimmable loads.