Dynaudio S4-LCR65W

The Dynaudio S4-LCR65 system lets you create personalised vertically or horizontally oriented left, centre and right three-way speaker channels. And it’s a breeze to install… even between stud bays.

Each module uses a passive crossover with a three-position switch, pre-configured to standard LCR channel configurations that use one or two connected woofer modules. Position the tweeter either way up and at any height in the array (so the listener gets total focus). Individual modules are easily connected using speaker wire, with their frames either connected together and installed in a single cut-out or spaced apart in multiple cut-outs to create a bespoke single channel.

Use the S4-LCR65W for...

Multi room audio
Use the Dynaudio S4-LCR65W in wall speaker with multi room audio systems such as Bluesound and Control4.

Home cinema
The S4-LCR65W can be used for front LCR channels or surround channels in home cinema applications.


Best suited to medium and larger size rooms.

S4-LCR65W specification

Sensitivity - 86dB 1W/1m
Long term power - 200 Watts
Impedance - 8 Ohms
Frequency range - 35Hz - 300Hz
Dimensions x depth - 395mm x 213mm x 90mm
Cut-out - 190mm x 373mm

2 x 6.5 inch bass module