TS-AMS24-2320

Triad 24-zone 24-source audio matrix switch

The Triad 24-zone audio matrix switch distributes stereo audio sources to powered amplifiers to deliver high-resolution audio throughout the home while preserving high-resolution audio quality. Including stereo RCA, digital coax and digital optical audio inputs to integrate with virtually any audio source. Stereo analog (RCA) audio outputs distribute sources to audio / video receivers and multi-room amplifiers. Each output can be adjusted with independent gain, bass, treble, five-band EQ, balance, loudness and monosumming controls.
Triad multi-room audio solutions are built from the ground up to deliver high-resolution audio throughout the home and hide neatly out of sight.

Share up to 24 audio sources to as many as 24 audio zones for multi-room audio distribution.

High signal-to-noise ratio delivers dynamic, high-resolution audio to every room in the house.

All audio inputs and outputs support resolutions up to 192 kHz/24 bit.

Independent output controls adjust volume, bass, treble, five-band parametric EQ, balance, loudness, and monosumming.

Independent input gain control for each source for consistent levels when switching between sources.

Two output zones can be grouped into a single 2.1 (stereo speakers + subwoofer) audio zone.

12V trigger outputs enable simple on/off control of Triad power amplifiers or other devices that support 12V power-on capabilities.

Audio sensing supports programmable events based on the presence of audio.

Ethernet control
Rack-mount ears included
Built-in EQ presets for Triad speakers

Downloads
Triad 24 zone audio matrix data sheet
THD
<0.005%, 20 Hz – 20 kHz

SNR
>105 dB, A-weighted—input to output

Frequency response
20 Hz – 20 kHz +/- 0.2 dB

Volume control per channel

0.5 dB steps, +0 to -80 dB range

Mute
Available on all outputs

Source input gain
0.5 dB steps, 0 to +12 dB on every input

Monosumming
Configurable per stereo output pair, each output combines the L/R input signal

Five-band parametric EQ

Adjustable per stereo output, +/- 12 dB, 0.5 dB steps

Supported sample rates
44.1 kHz, 48 kHz, 96 kHz, 192 kHz—at 16- or 24-bit resolution

Analog input voltage
2V

Analog output voltage
2V
Source inputs (Digital inputs are either coax or optical and are stereo PCM only)
16 x stereo analog (RCA)
8x digital coax
8x digital optical

Zone outputs
24 x stereo analog (RCA)

12V trigger outputs
4x mono 3.5 mm (1/8") outputs

Front power LED

1 × status LED

System status LED
1 × RGB LED

Ethernet
1 × RJ-45

ID button

Yes

Factory restore button
Yes

Dimensions without feet
(H×W×D) 3.5 × 17.5 × 10.38" (8.9 × 44.5 × 26.4 cm)

Dimensions with feet
(H×W×D) 3.88 × 17.5 × 10.38" (9.8 × 44.5 × 26.4 cm)