Triad 8-zone 8-source audio matrix switch

The Triad 8-zone audio matrix switch distributes stereo audio sources to powered amplifiers to deliver high-resolution audio throughout the home while preserving high-resolution audio quality. Including stereo RCA, digital coax and digital optical audio inputs to integrate with virtually any audio source. Stereo analog (RCA) audio outputs distribute sources to audio video receivers and multi-room amplifiers. Each output can be adjusted with independent gain, bass, treble, five-band EQ, balance, loudness and monosumming controls.
Triad multi-room audio solutions are built from the ground up to deliver high-resolution audio throughout the home and hide neatly out of sight.

Share up to 8 audio sources to as many as 8 audio zones for multi-room audio distribution.

High signal-to-noise ratio delivers dynamic, high-resolution audio to every room in the house.

All audio inputs and outputs support resolutions up to 192 kHz/24 bit.

Independent output controls adjust volume, bass, treble, five-band parametric EQ, balance, loudness, and monosumming.

Independent input gain control for each source for consistent levels when switching between sources.

Two output zones can be grouped into a single 2.1 (stereo speakers + subwoofer) audio zone.

12V trigger outputs enable simple on/off control of Triad power amplifiers or other devices that support 12V power-on capabilities.

Audio sensing supports programmable events based on the presence of audio.

Ethernet control
Rack-mount ears included
Built-in EQ presets for Triad speakers

Triad 8 zone audio matrix data sheet
<0.005%, 20 Hz – 20 kHz

>105 dB, A-weighted—input to output

Frequency response

20 Hz – 20 kHz +/- 0.2 dB

Volume control per channel

0.5 dB steps, +0 to -80 dB range

Available on all outputs

Source input gain
0.5 dB steps, 0 to +12 dB on every input

Configurable per stereo output pair, each output combines the L/R input signal

Five-band parametric EQ
Adjustable per stereo output, +/- 12 dB, 0.5 dB steps

Supported sample rates
44.1 kHz, 48 kHz, 96 kHz, 192 kHz—at 16- or 24-bit resolution

Analog input voltage

Analog output voltage
Source inputs (Digital inputs are either coax or optical and are stereo PCM only)
8 x stereo analog (RCA)
4 x digital coax
4 x digital optical
Inputs 5-8 are either analog or digital

Zone outputs
8 x stereo analog (RCA)

12V trigger outputs

2 x mono 3.5 mm (1/8") outputs

Front power LED
1 × status LED

System status LED

1 × RJ-45

ID button

Factory restore button

Dimensions without feet
(H×W×D) 1.75 × 17.5 × 10.38" (4.4 × 44.5 × 26.4 cm)

Dimensions with feet
(H×W×D) 2.13 × 17.5 × 10.38" (5.4 × 44.5 × 26.4 cm)