Need help or advice? Call us on 01732 807 579
1 / 3 - Click to view full screen  |  T1B-619
Special order

Triad One High Resolution Streaming Amplifier

Triad logo

The Triad One is a single-zone, high-resolution streaming amplifier and the easy way to add music into any room of a Control4 enabled home without the need to pull wire back to a central location. The Triad One supports high-resolution audio playback up to 192 kHz / 24 bit, with a built-in amplifier boasting an impressive 105 dB signal-to-noise ratio and 100 watts per channel enabling incredible sound in any room. Also included is a built-in 10-band parametric EQ delivering exceptional sound output and room optimisation.
The Triad One is also a great alternative to an AVR in a bedroom, kitchen, or other location when surround sound is not a requirement. Not only does the Triad One have digital and analog audio inputs to take the audio output from a TV to power a soundbar, it has two IR outputs to control the TV and another local source, if needed.

A line-level subwoofer output rounds out the system for deep bass when connected to a powered subwoofer. The Triad One is available in white and black, can be placed horizontally or vertically, and can be installed on a bookshelf, in a rack, or mounted behind a TV.
Audio inputs
2 inputs, 1 analog stereo and 1 digital, (S/PDIF coax or TOSLINK optical)

Audio outputs
1 stereo analog out, 1 sub/mono audio out

Zone speaker outputs
1 stereo, Phoenix-style connector

1 USB 2.0 port—supports playback of media stored on USB

2 IR ports—3.5 mm jack

RJ45 jack for local network connection, 10/100/1000BaseT

2 internal antennas, 2.4 GHz and 5 GHz, 802.11b/g/n

Front power LED
1 × RGB status LED

ID and factory restore buttons

Dimensions (H x W x D)
3 x 8.5 x 10.25" (7.6 x 21.6 x 26 cm)

Rated wattage/channel

100W @ 4 Ω / 60W @ 8 Ω

Minimum load impedance
Tolerates 3 Ω loads

Frequency response
+/- 0.5 dB, ref 1 kHz, 20 - 20,000 Hz, 4 or 8 Ω

< 0.01% 1 kHz at all output levels below clipping

< -105 dB reference to rated power A-weighted
Maximum input level

Analog to digital conversion
2V RMS = 0 dBFS

Analog frequency response
+/- 0.1 dB 20-20,000 kHz ref 1 kHz

Analog dynamic range
>114 dB A-weighted

THD in a 20 kHz bandwidth
< 0.001% 20 - 20,000 Hz up to 2V RMS

S/PDIF input

Accepts IEC 60958 standard inputs in 16/24-bit PCM stereo only, surround not supported

Accepted sample rates
30-200 kHz for direct input mode; 44.1k, 48k, 96k, 192k for streaming output mode

Optical input TOSLINK
Standard TOSLINK levels

DSP audio processing

24-bit audio processing double-precision filters

Signal-to-noise ratio
> 105 dB

Tone controls
+/- 12 dB with 650 Hz turnover frequency in 0.5 dB steps

10-band EQ
Ten one-octave filters in 0.5 dB Steps, +/- 12 dB

Volume control
Attenuates from 0 to -80 dB and off in 0.5 dB steps

Loudness control
Continuously variable from 100% volume to off

Subwoofer output
Mono summing of stereo audio or crossover mode

Subwoofer crossover type
4th order (24 dB/octave) Linkwitz-Riley

Crossover frequencies

80 Hz, 90 Hz, 100 Hz, 110 Hz, 125 Hz, 140 Hz

Signal present detectors

-30 dB low-pass filtered

Call us on 01732 807 579 to book your free Control4 smart home consultation

For over 15 years, Control4 has served as the smart home infrastructure for over 450,000 residences across the world. One beautiful, easy-to-use interface gives you simple and fast access to the technology in your home, allowing you to live a brilliantly smart and connected life.