C4-SDSW240-N-169

Control4 SDSW240-N dual load switch

The Control4 SDSW240-N dual load switch combines two relays and a configurable keypad for on/off control of up to two loads. The keypad can be configured with two to seven buttons using five different buttons sizes for a total of 38 possible configurations.
Provides independent control of up to two different loads.

Wireless communication and standard wiring provide easy installation in new construction and retrofit environments.

Compatible with a variety of load types including incandescent, halogen, electronic low-voltage (solid state) transformers, magnetic (iron core) low-voltage transformers, fluorescents, compact fluorescents, LEDs, and motors.

Continuously measures energy being used by the attached load.

Elegant, sophisticated design makes a beautiful addition to any home or business.

Custom engraving available to clearly identify each button.

Backlit button engraving with programmable colour control for easy readability regardless of time of day or light level.

Downloads

Control4 dual load switch (Zigbee) data sheet
Programmable RGB LEDs provide status feedback for lighting and other devices in the system.

Configure with two to seven buttons using five different button sizes for a total of 38 possible configurations.

Easy reconfiguration means there’s no need to worry about how many buttons will be needed on a specific switch before (or even after) installation.

Ships as “neutral” device with no buttons included. Keypad-style button kit and Rocker-style button kits sold separately in a variety of colours.

Ambient light sensor automatically adjusts backlight and status LED brightness depending on the light level in the room.

Control4 screw-less faceplates, sold separately, provide a sleek profile.

Installs in standard square UK wall boxes.
Control communications
ZigBee, IEEE 802.15.4, 2.4 GHz, 15-channel spread spectrum radio

Wires per connector

One 0.5 mm2 - 2.5 mm2 (20AWG - 10AWG) or Two 0.5 mm2 - 1.5 mm2 (20AWG - 16AWG)

Dimensions

81mm x 81mm x 30 mm

Power requirements

220VAC-240VAC +/-10%, 50/60 Hz
This device requires a neutral connection.

Supported load types

Incandescent, halogen, electronic (solid state) low-voltage (ELV) transformer, magnetic (iron core, inductive) low-voltage (MLV) transformer, compact fluorescent, LED, and motor.