Control4 SSW240-N single load switch

Wireless communication and standard wiring provide easy installation in new construction and retrofit environments.

Compatible with a variety of load types including Incandescent, Halogen, Electronic Low Voltage (solid state) Transformers, Magnetic (iron core) Low Voltage Transformers, Fluorescents, Compact Fluorescents, LEDs and Motors .

Continuously measures energy being used by the attached load.

Elegant, sophisticated design makes a beautiful addition to any home or business.

Custom engraving available to clearly identify each button.

Backlit button engraving with programmable colour control for easy readability regardless of time of day or light level.

Downloads
Control4 single load switch (Zigbee) data sheet

Programmable RGB LEDs provide status feedback for lighting and other devices in the system.

Configure with two to seven buttons using five different button sizes for a total of 38 possible configurations.

Easy reconfiguration means there’s no need to worry about how many buttons will be needed on a specific switch before (or even after) installation.

Ships as “Neutral” device with no buttons included. Keypad-style button kit and Rocker-style button kits sold separately in a variety of colours.

Ambient light sensor automatically adjusts backlight and status LED brightness depending on the light level in the room.

Control4 screw-less faceplates, sold separately, provide a sleek profile.

Installs in standard square UK wall boxes.

Control communications
ZigBee, IEEE 802.15.4, 2.4 GHz, 15-channel spread spectrum radio

Wires per connector
One 0.5 mm2 - 2.5 mm2 (20AWG - 10AWG) or Two 0.5 mm2 - 1.5 mm2 (20AWG - 16AWG)

Dimensions
83mm x 71mm x 33 mm

Power requirements
220VAC-240VAC +/-10%, 50/60 Hz
This device requires a neutral connection.

Supported load types
Incandescent, halogen, electronic (solid state) low-voltage (ELV) transformer, magnetic (iron core, inductive) low-voltage (MLV) transformer, compact fluorescent, LED, and motor.